Haunt · LIGHTS
Use Philips Hue lights for a horror night at home
Halloween is one reason to change the mood of a room. A quiet horror night works too. Haunt adds authored stories around compatible light effects; it is not a general replacement for the Hue app.
Updated · iOS 17+
At a glance
For direct Hue control, use an accessible Hue Bridge and compatible lights on the same local network as your iPhone. Pair the bridge in Haunt, then check one selected light before starting a story.
Connect the bridge once
Keep the iPhone and Hue Bridge on the same local network, and allow Local Network access when requested. A guest Wi-Fi network or network isolation can prevent discovery even when both devices have internet access.
Open Haunt’s home-connection controls and follow the Hue pairing steps. Use the bridge’s physical link button when the pairing flow asks for it. A previously saved bridge should not require repeated pairing every time you open a session.
Check a single lamp first
Select one lamp and start with a gentle supported effect, such as dimming. End the sample with Stop and check that the lamp returns to its previous state before starting another sample.
Colour and rapid flashes depend on the lamp’s capabilities and connection. A white-temperature lamp does not become a colour lamp through software. If a recovery message remains, resolve the restoration state rather than repeatedly starting new samples.
When the same lamp appears in Apple Home
Apple Home and a direct Hue connection can expose the same physical lamp through different routes. Choose one route for the lamp during the initial check so that you can see which connection is being tested.
If Haunt cannot access Apple Home, check the Home permission separately. Seeing the lamp in Apple’s Home app does not itself grant Haunt permission to use it.
A saved bridge that is offline
A stored bridge is still part of your setup. If it cannot be reached, reconnect it or explicitly disconnect that route in Haunt before choosing a phone-only session. This is different from a new user who has never registered a bridge.
Stop/Panic attempts restoration through the available connection. If the bridge loses power or network access, check and restore the lamp through its usual controls before continuing.